Pioneer 10" D-Series Dual 2 Ohms Voice Coil Subwoofer - TS-D10D2
WAS $240.00
$219.99 CAD
Literature
You may also like
- Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP) Cone Construction
- Butyl Rubber Surround for Strength and Linearity During High Excursion
- Oversized 56.4 oz Double Stacked Magnet and Vented Pole Yoke for Increased Power Handling
| Build | |
|---|---|
| Unit Size (Dimensions) | 10-1/2" |
| Gasket | ABS |
| Wire Terminals | Push Type |
| Damper | Aramid |
| Voice Coil wire | Copper |
| Voice Coil Type | Dual Voice |
| Voice Coil Bobbin | Alminium |
| Magnet Material | Ferrite |
| Magnet Weight | 57.8 oz |
| Surround Type | Rolled |
| Basket Material | Stamped Metal |
| Surround Material | Rubber |
| Center Cap Material | ABS |
| Size | 10" |
| Cone Material | IMPP - Aramid Fiber |
| Shape | Round |
| Mounting Depth | 5-1/2" |
| Cut Out dimensions | 9" |
| Equivalent Compliance (VAS) [L] | 20.9 |
| Free Air Resonance (Fs) [Hz] | 40 |
| Total Speaker "Q" (Qts) | 0.7 |
| Linear Excursion (Xmax) [mm] | 9.8 |
| Recommended Sealed Box Volume [L] | 19.8 |
| Port Box volume [L] | 19.8 |
| Port Length | 5" |
| Port Diameter | 2" |
| Key Features | |
| Nominal Impedance - OHM | 2 DVC |
| System Type | Component Subwoofer |
| Sensitivity (1W/1m) | 74dB |
| Frequency Range | 20 Hz to 6.6 kHz |
| CTA-2031 Compliant | Yes |
| Warranty | 1 Year |
| Continuous Power handling (RMS) - Watts | 500 Watts |
| Maximum Peak Power Handling - Watts | 1500 Watts |