Kanto Full Motion Tv Mount - PDX680W

Category : TV Mounts
SKU : PDX680W


Literature

Meet PDX680W, the standard full motion TV bracket in white from Kanto. Sitting a mere 2” from the wall and extending up to 24”, the PDX680W is the perfect solution for versatility.  PDX680W offers 18° of tilt and a 27” wall plate to accommodate up to 24” studs.  With integrated cable management and plastic caps to hide the lag bolts in the wall, the PDX680W is not only functional, but easy on the eyes too.  Also available in black as the PDX680.

With 24″ of extension, the white PDX680W gives you unparalleled viewing options.

LOW PROFILE DESIGN

The unique design of the PDX680W allows your TV to sit 2 inch’s from the wall when fully pushed in.

FITS VESA SIZES TO 700 X 400

The H Frame mounting bracket accommodates VESA sizes from 100×100 to 700×400.  The mounting arms come with plenty of options to raise or lower the TV depending on the VESA pattern on the TV.

MAGNETIC LAG BOLT COVERS

Magnetic covers go over the lag bolts to give the wall plate an elegant look.  Remove the covers when you install or remove the wall plate from the wall.

EXTENDS 24 INCHES

Even with its low-profile design the PDX680W can extend 24” from the wall, giving you plenty of room for tilting and swiveling your TV, or for reaching out from alcoves.

SUPPORTS 125 POUNDS

Designed with strength in mind, the PDX680W’s solid steel frame can hold up to 125 lb (57 kg) with no concern, even at full extension.

SWIVELS UP TO 170 DEGREES

The articulating arms on the PDX680W allow for a maximum of 170 degrees (with a 39″ TV).  The larger the TV, the less swivel the PDX680W will have

TILT MECHANISM

The accessible tilt mechanism makes it easy to angle your TV 15° forward or 3° backward. Once you’ve found the best viewing angle, tighten the nuts to secure your TV in place.

SLEEK CABLE MANAGEMENT

Four cable management raceways are attached to the bottom of the wishbone arms. These are easily accessed by loosening a screw, twisting them to the side, laying in the cable, and re-inserting the screw. Route multiple cables down one side, or power and HDMI down opposite sides – whatever works best.

WHITE CABLE SLEEVE

For a more discreet appearance, the white TV wall mount comes with a white cable sleeve to match the surrounding area.

EVERYTHING YOU NEED

We supply you with everything except a toolbox to ensure that your installation goes smoothly. Instruction manuals are provided in English, French, and Spanish, as well as the parts you need to mount your TV safely and securely. Easy-to-follow online videos and phone support are available to assist you along the way.

CONVENIENT BOLT PACK

The PDX680W includes a labeled bolt pack with a variety of bolt diameters and lengths, as well as several spacers to allow a custom fit. Lag bolts and concrete anchors are provided so you can mount to wood studs and concrete walls.

Specifications
TV Sizes: 39” to 80”
Weight Allowance: 125 lb (57 kg)
VESA Sizes: 100×100 to 700×400
Wall Plate: 27″ (68.5 cm); Accommodates dual studs with up to 24″ spacing
Inputs & Outputs
Tilt: +15° to -3°
Swivel: 170° at full extension (with 39″ TV)
Extension: 24″ (61 cm) from the wall
Profile: Sits 2″ (5 cm) from the wall , Integrated cable management , Adjustable horizontal leveling , Magnetic plastic covers to hide lag bolts
General
Includes:Paper wall template for marking pilot holes , Installation manual , White cable sleeve (White model only) , All mounting hardware for wood stud and concrete installation
Warranty: 5 years
WEIGHTS AND MEASUREMENTS
Shipping box weight:27.8 lb (12.6 kg)
Shipping box dimensions: 29.6″ x 12.8″ x 4.3″ (75.2 x 32.5 x 11 cm)
Product weight:22.5 (10.2 kg)
UPC:800152718200

Write a review