8" Hertz 2-Way Marine Coaxial Speakers with RGB LED Lighting in White - HMX 8 S-LD-SW
You may also like
HMX 8 S-LD-SW marine coaxial speaker features a white sports grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.
Technologies
RGB MULTICOLOR
Built-in RGB led lighting creates sophisticated atmosphere, adding tons of class to your vessel.
IP 65 CERTIFICATION
WATER JET TESTED
The protection grade IP65 for speakers define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.
UV RESISTANT
According to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV rzadiations while cruising on the open sea.
SALT FOG TESTED
To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
| Electro-acoustic Specs | |
|---|---|
| Qes | 0,61 |
| Qts | 0,58 |
| BL T*m | 6,6 |
| Cms mm/N | 0,37 |
| Mms g | 27,3 |
| Vas I | 29,46 |
| Le mH | 0,52 |
| Fs Hz | 50 |
| Re Ohm | 3,1 |
| D mm | 174 |
| Qms | 11 |
| Spl dB | 91 |
| TECHNICAL SPECS | |
| Dome | PEI |
| Xmech mm (in.) | ±8,5 (0.33) |
| Cone | Polypropylene with UV inhibitors |
| Tweeter Magnet | Neodymium |
| Woofer Magnet | High density flux ferrite |
| Weight of one speaker kg (lb.) | 1,66 (3.66) |
| Tweeter Magnet size D x h mm (in.) | 19,7 x 3 (0.78 x 0.12) |
| Woofer Magnet size D x d x h mm (in.) | 90 x 40 x 20 (3.54 x 1.57 x 0.79) |
| Frequency Response Hz | 45 ÷ 25k |
| Tweeter Voice Coil Ø mm (in.) | 20 (0.8) |
| Woofer Voice Coil Ø mm (in.) | 32 (1.26) |
| Tweeter diaphragm mm (in.) | 36 (1.4) |
| Depth mm (in.) | 123 (4.84) |
| Impedance Ohm | 4 |
| Power Handling - Peak W | 200 |
| Power Handling - Continuous W | 100 |
| Size mm (in.) | 200 (8) |
| Component | HI-END LED COAX |