Panamax 1 RU 20 AMP 8 BlueBOLT Programmable Outlets w/Auto Reset, 10Ft IEC Cord - M4320-PRO

Category : Power Conditioners
SKU : M4320-PRO


Literature

Panamax M4320-PRO

Advanced 20 amp power controller with top of the line Linear Noise Filtration, Automatic Voltage Monitoring and catastrophic surge protection.

The M4320-PRO features Panamax™ revolutionary AVM (Automatic Voltage Monitoring) circuit, and our exclusive Linear Filtering Technology (LiFT). Together, these technologies comprise precisely what our customers have come to expect from Panamax: uncompromised AC protection and purification. Outlets: all rear panel outlets are separately controlled. They are grouped into four (4) filter-isolated banks. BlueBOLT™ is included, providing secure, hosted IP system control and monitoring for the M4320-PRO.

Panamax M4320-PRO Features at a Glance

  • 20 Amp Capacity M4320-PRO
  • 8 Individually Controllable Rear Panel Outlets
  • Fully Programmable
  • TCP/IP (BlueBOLT™) Installed
  • RS-232 Card (Included, not installed)
  • Linear Filtration with 3 Isolated LiFT Filter Banks, 76db (5 kHz - 250 kHz), 46 db (250 kHz - 1 MHz)
  • One Isolated Filter Bank for High Current Devices, 60db (5 kHz - 450 kHz), 46 db (450 kHz - 1 MHz)
  • Front Panel Circuit Breaker
  • Removable Front Rack Ears
  • 12 Volt Input Triggering
  • Detachable 10 ft. Power Cord - 20A plug
  • AVM & Protect-or-Disconnect Circuitry
General
FamilyPro Series
Line Voltage120 (Volts)
BlueBOLT EnabledYes
Power Factor TechnologyNo
Number of Outlets9
Number of Isolated Banks4
Outlet Descriptions1 (always on, linearly filtered outlet, front panel) 6 (individually switchable, linearly filtered outlets) 2 (individually switchable, high current outlets)
Rack MountableYes
Rack Ears IncludedYes
Front Panel Meter(s)Volts/Amps Combo Meter
Front Media Light(s)No
ControlFull outlet control using BlueBOLT or Telnet commands. Limited outlet control through front panel buttons or rear panel DC trigger.
Voltage RegulationNo
CompliancecCSAus
USB ChargingN/A
Low Voltage Trigger12V In
AC Power Cord10 ft. detachable cord with 20 amp plug
Dimensions19" W (17" without rack ears) x 12.25" D x 1.75" H
Weight12 lbs
AC Protection
AC Protection TechnologyProtect or DisconnectAutomatic Voltage MonitoringL-N, L-G, N-G Protection ModesThermal Fusing
Automatic Voltage ShutoffYes
Under-Voltage Shutoff100 VAC ± 2 VAC
Over-Voltage Shutoff134 VAC ± 2 VAC
Maximum Current Rating20 (Amps)
Initial Clamping Level200V Peak
Filtration
Filtration TechnologyLiFT
Filtration RatingBanks 1, 2, 3: 76db, 5KHz - 250 kHz Bank 4 High Current Outlets: 46 db, 250 KHz - 1 Mhz
Signal Line Protection
Signal Line Protection1 LAN 1 Tel2 Cable/Satellite
Shipping Info
Length19.6 (Inches)
Width4.9 (Inches)
Height21.4 (Inches)
Weight17.55 (Lbs)
Unit of MeasureEach
UPC050616008600
Master Pack Qty2
Other Specifications
Voltage Protection Rating (UL 1449 3rd Edition, 3,000A)500V
Single Pulse Energy Dissipation2700 Joules
Peak Impulse Current135,000 Amps
LAN - Wires Protected8-Wires
LAN - Compatibility10/100/1000 BASE-T
LAN - Clamping Level60 ± 5V
Coax - ShieldedYes
Coax - Insertion Loss< 0.5 dB
Coax - HD 1080 i/p ReadyYes
Coax - Frequency Range0 MHz - 2.2 GHz
Coax - ConnectionsFemale "F", Gold Plated
Coax - Clamping Level75V
Coax - BidirectionalYes

Write a review